SHARE C1 Pro handheld RTK SLAM LiDAR scanner

SHARE 3DCAM

SHARE C1 Pro

Q: What makes C1 Pro the survey-ready C1?

Built-in RTK, dual 1-inch cameras and a mechanical shutter on the same handheld walk-and-scan workflow as the rest of the SHARE C1 series. Specs and kits on this page are for the unit shipping now.

Q: How does C1 Pro sit against C1 and C10 for renovation and survey work?

C1 for predominantly indoor or GPS-denied work without integrated RTK. C1 Pro when mixed indoor and outdoor sites need AUSCORS NTRIP so the cloud sits on real-world coordinates. C10 for long traverses, large plants and jobs where lighter units drift. We map the pick against site size and deliverable on a demo or quote call.

Q: Can C1 Pro replace most manual renovation measurement?

For complex interiors, old buildings and multi-team jobs, yes for most repetitive tape work and note-taking. You capture spatial context once for design, documentation and coordination. Critical tolerances and occluded services still need targeted manual verification. Tape remains fine for simple checks.

Q: What's included in a Mirrormapper C1 Pro deploy?

Configured scanner, AUSCORS NTRIP set up on your account, SHARE Capture and PointClouds Studio workflow for your deliverable, and hands-on handover from our Melbourne team. Same engineers stay on support. You leave with a working field method, not a sealed box and a PDF.

Q: What accuracy should we expect on real as-built sites?

Three numbers matter. RTK positioning is centimetre-class with an AUSCORS NTRIP fix outdoors. Point-cloud relative accuracy is typically within a few centimetres on a clean traverse. Absolute accuracy depends on traverse length and check strategy. Long jobs still benefit from check shots. We validate against a site you care about in the demo.

Q: Do glass, mirrors and furniture wreck the scan?

They can. Reflective and transparent surfaces confuse ranging; furniture creates occlusions. Plan multi-angle paths, clear what you can, and verify thin or shiny details manually. The scanner records visible conditions, not a wish list. Path planning is part of handover for renovation crews.

Q: Can we rely on RTK for absolute coordinates indoors?

Not while you are inside. Fix outdoor legs with AUSCORS NTRIP, let SLAM bridge the interior, or use control points to the site datum. Confirm coordinate system and elevation requirements before promising engineering absolute results. We design that strategy when we commission the kit.

Q: Is the point cloud the same as CAD, BIM or a mesh deliverable?

No. It is measured spatial data for review and reference. Automated CAD tools draft faster; they do not replace professional drawings. LAS is points, not FBX or OBJ. Mesh formats need reconstruction. 3DGS suits key-area presentation and needs NVIDIA CUDA. Whole-building engineering delivery usually stays on cloud, mesh or tiles.

Q: Can we use C1 Pro scans in CAD, SketchUp, Revit or BIM?

Yes as a spatial underlay. Export LAS, LAZ, E57 or PLY; many CAD stacks also take RCS-style point clouds for drafting. After import you measure and model against the cloud. It is not an editable BIM object by itself. Landmapper is optional if you want mapping products with less cleanup.

Q: Can scan results support as-built and construction documentation?

Yes. Existing conditions, progress records, handover context and issue discussion all benefit from a measurable cloud. Final as-built sheets still follow project standards and human review. We align capture settings to the documentation format you invoice.

NTRIP RTK handheld. Absolute coords when you need them.

$9,889

Choose your kit

Pay with

Product setup support
Operator training in Melbourne
12-month warranty

Capture it for posterity

One walk builds a dense colour cloud you can Gaussian splat and open later. The space stays as you left it, without a second trip.

Measure the fit-out

Walk the rooms once. The live cloud gives you dimensions for as-built and renovation work without chasing every wall with a tape.

Quality across the site

RTK-fixed walks keep absolute hold. Colourised returns stay dense on walls, ground and structure when the loop gets long.

Easy, Out of the Box

Pick it up, turn it on, start scanning. The C1 acquires an RTK fix in seconds - no base station setup, no targets.

Overview

Discover

200,000 points per second at 10 Hz, tilted 25° for coverage. Range 0.1 to 70 m. Dense returns on walls, ground and structure.

Everything that ships with the kit you select.

C1 Pro Unit

C1 Series Battery

GCP Positioning Plate

SHARE Hard Case

DJI OM 5 Phone Clamp

Charger

SD Card Adaptor

USB-C Data Cable

Data Cable

SHARE User Manual

With this kit

Added with this kit

SHARE C1 Battery Grip

LiDAR sensor	Livox Mid-360
Range (10% / 80% reflectivity)	40 / 70 m (10% / 80%)
Points/sec	200k pts/s
Rel. accuracy	< 1 cm
Cameras	2 × 16 MP
RTK	Built-in

Choosing & buying

What makes C1 Pro the survey-ready C1?

Built-in RTK, dual 1-inch cameras and a mechanical shutter on the same handheld walk-and-scan workflow as the rest of the SHARE C1 series. Specs and kits on this page are for the unit shipping now.

How does C1 Pro sit against C1 and C10 for renovation and survey work?

C1 for predominantly indoor or GPS-denied work without integrated RTK. C1 Pro when mixed indoor and outdoor sites need AUSCORS NTRIP so the cloud sits on real-world coordinates. C10 for long traverses, large plants and jobs where lighter units drift. We map the pick against site size and deliverable on a demo or quote call.

Can C1 Pro replace most manual renovation measurement?

For complex interiors, old buildings and multi-team jobs, yes for most repetitive tape work and note-taking. You capture spatial context once for design, documentation and coordination. Critical tolerances and occluded services still need targeted manual verification. Tape remains fine for simple checks.

What's included in a Mirrormapper C1 Pro deploy?

Configured scanner, AUSCORS NTRIP set up on your account, SHARE Capture and PointClouds Studio workflow for your deliverable, and hands-on handover from our Melbourne team. Same engineers stay on support. You leave with a working field method, not a sealed box and a PDF.

Accuracy & performance

What accuracy should we expect on real as-built sites?

Three numbers matter. RTK positioning is centimetre-class with an AUSCORS NTRIP fix outdoors. Point-cloud relative accuracy is typically within a few centimetres on a clean traverse. Absolute accuracy depends on traverse length and check strategy. Long jobs still benefit from check shots. We validate against a site you care about in the demo.

Do glass, mirrors and furniture wreck the scan?

They can. Reflective and transparent surfaces confuse ranging; furniture creates occlusions. Plan multi-angle paths, clear what you can, and verify thin or shiny details manually. The scanner records visible conditions, not a wish list. Path planning is part of handover for renovation crews.

Can we rely on RTK for absolute coordinates indoors?

Not while you are inside. Fix outdoor legs with AUSCORS NTRIP, let SLAM bridge the interior, or use control points to the site datum. Confirm coordinate system and elevation requirements before promising engineering absolute results. We design that strategy when we commission the kit.

Workflow & data

Is the point cloud the same as CAD, BIM or a mesh deliverable?

No. It is measured spatial data for review and reference. Automated CAD tools draft faster; they do not replace professional drawings. LAS is points, not FBX or OBJ. Mesh formats need reconstruction. 3DGS suits key-area presentation and needs NVIDIA CUDA. Whole-building engineering delivery usually stays on cloud, mesh or tiles.

Can we use C1 Pro scans in CAD, SketchUp, Revit or BIM?

Yes as a spatial underlay. Export LAS, LAZ, E57 or PLY; many CAD stacks also take RCS-style point clouds for drafting. After import you measure and model against the cloud. It is not an editable BIM object by itself. Landmapper is optional if you want mapping products with less cleanup.

Can scan results support as-built and construction documentation?

Yes. Existing conditions, progress records, handover context and issue discussion all benefit from a measurable cloud. Final as-built sheets still follow project standards and human review. We align capture settings to the documentation format you invoice.

What do SHARE Capture and PointClouds Studio each do?

Capture handles field connection and scanning. PointClouds Studio processes, reviews and supports documentation and 3DGS where licensed. Confirm current SHARE software features for your device before locking a production pipeline.

Support

We missed a room - can processing invent it?

No. Areas not captured cannot be truthfully reconstructed. Check coverage on site and rescan before you leave. Coverage discipline is cheaper than a second mobilisation. We build that habit into Melbourne training.

What if something fails on a remote renovation site?

Australian warranty and support through us. We diagnose remotely first, then arrange swap or service. Phone and email reach the same engineers who did your handover. Spare battery in Field or Survey kits is the practical insurance for long days away from the office.

Do I need my full software stack nailed down before booking a demo?

No. Tell us the renovation, interior or as-built job you sell most. We scan a representative space and show export into your CAD or BIM tools. Book a free on-site demo when you want proof on your own floor plate.

Try a sample cloud

Next step

Put it on four legs

When the site needs no operator inside, we can put C1 Pro on an autonomous carrier. Book a meeting and we will map the mission with you.