SHARE C1 Pro
NTRIP RTK handheld. Absolute coords when you need them.
- Dual 1" mechanical shutter
- Built-in RTK
- Sub 5 cm absolute
From$10,010
to
$10,985
Handheld SLAM scanners
SHARE C1 Series handheld SLAM scanners
Scan what your drone can't. Colourised, RTK-georeferenced point clouds of interiors, stairwells and tunnels, finished on site. Sub-5 cm absolute accuracy, no base station.
- Commissioned in Melbourne
- 12-month warranty
- Product setup support
Choose your scanner
Same handheld workflow across the range. The difference is positioning. C1 for relative-accuracy jobs. C1 RTK or C1 Pro when the deliverable needs real-world coordinates. Setup and training included.
SHARE C1
Walk through. Walk out with a model.
- Software and training included
- Global shutter colour
- Under 1 cm relative
From$7,758
to
$9,858
Capture it for posterity
One walk builds a dense colour cloud you can Gaussian splat and open later. The space stays as you left it, without a second trip.
Measure the fit-out
Walk the rooms once. The live cloud gives you dimensions for as-built and renovation work without chasing every wall with a tape.
Quality across the site
RTK-fixed walks keep absolute hold. Colourised returns stay dense on walls, ground and structure when the loop gets long.
Easy, Out of the Box
Pick it up, turn it on, start scanning. The C1 acquires an RTK fix in seconds - no base station setup, no targets.
Compare
How it compares
Side by side on sensor, range, cameras, shutter and RTK.
| Spec | ||
|---|---|---|
| LiDAR sensor | Livox Mid-360 | |
| Range (10% / 80% reflectivity) | 40 / 70 m (10% / 80%) | |
| Points per second | 200k pts/s | |
| Relative accuracy | < 1 cm | |
| Absolute accuracy | — | < 5 cm |
| RTK | Optional | Built-in |
| Cameras | 2 × 2.3 MP | 2 × 16 MP |
| Weight | 955 g | 1,079 g |
Payloads, Accessories, & Spares
No products match
Try adjusting your filters or search term.
Questions, answered
Choosing & buying
When is C1 the right buy instead of C1 Pro?
When most jobs are indoor, underground or GPS-denied, or you already run a ground-control workflow you trust. C1 uses the same SLAM core without integrated RTK. Step up to C1 Pro when mixed indoor and outdoor sites need AUSCORS NTRIP so the cloud sits on the map without extra control burden. Not sure? Ask us. We match the kit to the job.
Can handheld scanning replace tape measures for renovation measurement?
For complex interiors, old buildings and multi-trade coordination, yes for most repetitive measuring and note-taking. One SHARE walk captures spatial context the whole team can reuse. Critical tolerances and hidden services still need targeted manual checks. Simple one-off dimensions can stay on tape or laser.
What's included in a Mirrormapper C1 deploy?
Genuine kit with SHARE Capture and PointClouds Studio workflow for your deliverable, and hands-on handover from our Melbourne team. Same engineers stay on support. If you later need RTK, we map the C1 RTK module or C1 Pro upgrade path against real jobs, not a catalogue upsell.
Do interior designers get value without being surveyors?
Yes. Capture the space once, then design against a measurable cloud instead of re-visiting for every sketch. Helps most on complex or heritage interiors and fast proposals. Furniture still occludes; we teach path planning so coverage is deliberate. Book a free on-site demo and we scan something you actually need.
Accuracy & performance
What affects accuracy on renovation and as-built jobs?
Walk path, loops, occlusion, reflective materials and how you fix coordinates. Relative geometry in a clean cloud is typically centimetre-class. Absolute position indoors needs control or a later outdoor RTK bridge. We set expectations against your acceptance criteria at handover so tender language matches the kit.
Do glass, mirrors and thin objects scan reliably?
Often not. Reflections and transmission confuse ranging. Avoid strong reflectors where possible; use film, markers or alternate angles when the surface matters. Thin cables and glass edges are better verified with photo or caliper. Use the scanner for primary structure and room context.
Will long corridors stay drift-free on C1?
Feature-poor or repetitive corridors stress SLAM. Segment walks, add loops, slow down and use known points where absolute hold matters. For very long or mixed outdoor traverses, C10 holds trajectory cleaner. We are honest when C1 is enough and when you should step up.
Workflow & data
Is the point cloud a finished CAD or BIM model?
No. It is measured spatial data for review, measure and reference. Automated CAD helpers create drafts only. Final drawings and BIM still need professional drafting against standards and design intent. LAS is points, not a mesh. FBX, OBJ or OSGB need a reconstruction step first.
Can we push C1 data into CAD, SketchUp or Revit?
Yes as an underlay. Export LAS, LAZ, E57 or PLY, and use RCS-style imports where your CAD stack supports them. After import you view, measure and model against the cloud. It does not become an editable BIM object by itself. We wire the export you invoice during handover.
What software do we actually use day to day?
SHARE Capture in the field. PointClouds Studio for processing, review and documentation aids. 3DGS, where available, needs an NVIDIA CUDA GPU and suits presentation areas more than whole-building engineering delivery. Confirm current SHARE feature set for C1 before you lock a pipeline.
Can as-built and construction documentation come from these scans?
Yes as existing-conditions and progress records: measurable spatial context for review, drawing prep, handover and issue discussion. Final as-built sheets still follow project standards and human check. Tell us the deliverable format and we align capture and export at commissioning.
Support
We missed a room on site - can software fill it in?
No. Uncaptured areas cannot be truthfully reconstructed. Check coverage before you leave and rescan immediately. Returning for a critical miss is cheaper than inventing geometry. Coverage checklist is part of Melbourne handover.
What warranty and support do we get?
Twelve-month warranty backed by Australian Consumer Law, with phone and email to the same Melbourne engineers who trained your crew. Most field issues we sort live. Operator changes mid-programme can be re-trained. Same team that commissions stays on support.
Do I need my full CAD stack figured out before a demo?
No. Bring the renovation or interior job type you sell most. We scan a representative space and show the path into the tools you already use. Book a free on-site demo when you are ready.
Scan something you actually need
Book a free on-site demo. We bring the C1 Pro, scan your site, and hand you the cloud to evaluate against your deliverable.